You’ve been there: everything’s connected, people are playing, but there’s no sound. In most cases, a faulty cable is the culprit. Enter our new CABLE TESTER CT100. This intelligent, CPU-controlled tester accepts virtually any connector type: XLR, mono and TRS phone (1/4", 1/8", TT), RCA and MIDI. And it’s incredibly easy to use: The LED display shows which input pin is connected to which output pin. Separate shield and phantom power LED’s indicate proper shield connection and phantom power presence.
The CT100 also offers an installed cable test mode, which requires insertion of only one plug and indicates shorts and opens, as well a continuity check. As a special feature, a test tone generator is included to facilitate additional testing of your audio gear and connections. Locate your problem fast with the new CABLE TESTER CT100.
Microprocessor-controlled cable tester
Three modes: cable test mode, installed cable test mode and test tone mode
Accepts XLR, mono and TRS phone (1/4", 1/8", TT), RCA and MIDI Connectors
Phantom power detect
Grounded shield check
Test tone generation (1 kHz and 440 Hz)
Battery operation (requires two AA alkaline batteries
|Custom Stock Status Qty Rule||N/A|